Effect of Straw Throwing Method and Some Operational Parameters on the Performance of a Small Rectangular Baler
DOI:
https://doi.org/10.25156/ptj.v10n2y2020.pp21-26Keywords:
Barley straw, Heaps, Rectangular baler, Wheat straw, WindrowsAbstract
The experiment was carried out on a private farm in Karak village in 2017 to study the effects of the method of throwing the straw behind the combine harvester and some operational factors on the performance of a small rectangular baler. The field was planted with wheat (Triticum spp.) and barley (Hordeum vulgare). A small rectangular baler type (Ćicoria 454), Italian made was used to pick up and bale the straws, which were thrown as heaps and windrows in the field. The results obtained showed that picking up the straw as windrows improved the baler’s performance over the heaps in terms of number of mechanical units stops, time require for baling, fuel consumption, baler’s throughput capacity, and baler’s throughput efficiency, on the other hand, the forward speed also affected the baler’s performance when the straw was thrown as windrows; By increasing the forward speed, the slippage percentage increased but the fuel consumption, baler’s throughput efficiency, and baler’s throughput capacity decreased.
Downloads
References
Afify, M. T., A. H. Bahnasawy, and S. A. Ali. 2002. Effect of Rice Straw Picking up Method on the Performance of a Rectangular Baler. AIC 2002 Meeting CSAE/SCGR Program, Paper No. 02-217, Saskatoon, Saskatchewan.
Al-Auobi, T. H. M and S. Y. Taha. 2009. Effect of baler type and tractor speed on slippage percentage, baler productivity and baler field efficiency. Al-Forat J. Agric. Sci. 1(4): 183-188.
Al-Banna, A. R. 1990. Tillage Equipment. Dar Al-Kutub for Press and Publishing, Mosul University, Iraq.
Alnima, M. J. 1990. Mechanization of Stock Breeding. Dar Al-Kutub for Press and Publishing, Mosul University, Iraq.
ASABE Standard. 2008. S358.2: Moisture Measurement-Forages. ASABE, St. Joseph, Michigan.
ASABE Standard. 2009. D497.6, Agricultural Machinery Management Data. 45th ed. ASABE Standards, St. Joseph, Michigan, USA.
Chandrasekaran, B., K. Annadurai and E. Somasundaram. 2010. A Textbook of Agronomy. New Age International Publishers, New Delhi, India.
Farias, M. S., J. F. Schlosser, P. Linares, J. P. Barbieri, G. M. Negri, L. F. V. Oliveira and I. I. P. Rüdell. 2017. Fuel consumption efficiency of an agricultural tractor equipped with a continuously variable transmission. Ciênc. Rural. 47(6): 1-7. Available from: https://www.pdfs.semanticscholar.org/43f4/2cabb63869e415ea8411867f1206ba9f2246.pdf?_ga=2.250194566.1283332491.1596042771-1170248589.1578002783. [Last accessed on 2020 Mar 02].
Field, H. L and B. S. John. 2007. Introduction to Agricultural Engineering Technology. A Problem Solving Approach. 3rd ed. Springer, USA.
Grisso, R. B., J. V. Perumpral, D. Vaughan, G. T. Roberson and R. Pitman. 2010. Predicting Tractor Diesel Fuel Consumption, Publication No. 442-073. Virginia Cooperative Extension, Virginia.
Gummert, M., N. van Hung, P. Chivenge and B. Douthwaite. 2020. Sustainable Rice Straw Management [E-Book]. Springer Open. This Springer Imprint is Published by the Registered company Springer Nature Switzerland AG. Available from: https://www.link.springer.com/content/pdf/10.1007%2F978-3-030-32373-8.pdf. [Last accessed on 2020 Mar 21].
Hunt, D. 2001. Farm Power and Machinery Management. 10th ed. A Blackwell Publishing Company, Iowa State Press, USA.
Jasim, A. A. and H. A. Jebur. 2015. Impact of primary tillage system on fuel consumption, management and total tractor costs. Iraqi J. Agric. Sci. 46(1): 31-35.
Ministry of Planning Report. 2017. A Survey of Winter Planted Crops in the Kurdistan Region, (Area, Yield, Production, and Cost). Kurdistan Region Government, Ministry of Planning, the Foundation of Statistics of Kurdistan Region.
Morad, M. M., A. E. Hashish, A. F. Abd El-Motalib and A. M. El-Shal. 2002. Effect of some operating parameters on pickup balerperformance. Misr J. Agric. Eng. 19(1): 136-158.
SAS. 2009. SAS/STAT 9.2 User’s Guide, SAS Campus Drive, Cary, North Carolina 27513. 2nd ed. SAS Institute Inc., USA.
Srivastava, A. K., C. E. Goering and R. P. Rothrbach. 2006. Engineering Principles of Agricultural Machines. 2nd ed. ASABE, St. Joseph, Michigan, USA.
Vink, A. 2015. Crop Residues for Animal Feed. CTA Publications Distribution Service, Netherlands.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2020 Affan O. Hussein
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Authors who publish with this journal agree to the following terms:
1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License [CC BY-NC-ND 4.0] that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).