Time History Analysis of Frame Structure Systems by State-space Representation Method
DOI:
https://doi.org/10.25156/ptj.v10n1y2020.pp140-147Keywords:
State-space model, Time history analysis, Frame structures, Dynamic analysis, Linear time-invariant systemsAbstract
This paper develops the state-space representation (SSR) in the field of seismic analysis of the building structures. Dynamic analysis of multi-degree-of-freedom structures involves the solution of second-order linear differential equations which they represent the equation of motion of the structure. In this paper, a SSR was formulated to replace differential equation with two coupled first-order linear differential equations. The objectives of this study are as follows: (i) To implement the SSR as a powerful tool in dynamic analysis of frame structures and (ii) to conduct a linear time history analysis for large structures subjected to ground acceleration and the seismic responses of the building were studied as well. The analysis was based on the assumption that the system is elastic linear time-invariant system and material nonlinearity is not considered. The 1940 El-Centro earthquake time history record has been used in the study. There are many effective traditional methods which can be used for carrying out linear dynamic analysis of the structures, however, this paper introduces a state-space model as an alternative approach to perform this analysis. The advantage of this method, it works properly with MATLAB software, gives explicit result for time-invariant systems, applied to multi-input and multi-output control systems, solve the equation of motion for complicated dynamic problems.
Downloads
References
Bathe, K. J. 1982. Finite Element Procedures in Engineering Analysis. Prentice-Hall, United States.
Chopra, A. K. 2001. Dynamics of Structures: Theory and Applications to Earthquake Engineering. Prentice-Hall, United States.
Create State-space Model, Convert to State-space Model-MATLAB ss. n.d. Available from: https://www.mathworks.com/help/control/ref/ss.html. [Last accessed on 2020 Jan 01].
Dyke, S. J., B. F. Jr. Spencer, M. K. Sain and J. D. Carlson. 1996. Modeling and control of magnetorheological dampers for seismic response reduction. Smart Mater. Struct. 5(5): 565.
Hangos, K. M., R. Lakner and M. Gerzson. 2001. Fuzzy control systems. In: Intelligent Control Systems: An Introduction with Examples. Emerald Group Publishing Limited, United Kingdom. p191-226.
Javed, M., H. Aftab, M. Qasim and M. Sattar. 2008. RLC circuit response and analysis (using state space method). Int. J. Comput. Sci. Netw. Secur. 8(4): 48-54.
Li, P. and L. T. Pileggi. 2003. NORM: Compact model order reduction of weakly nonlinear systems. Paper presented at the Proceedings of the 40th annual Design Automation Conference, United States.
Luenberger, D. G. 1964. Observing the state of a linear system. IEEE Trans. Mil. Electron. 8(2): 74-80.
Mendoza Zabala, J. L. 1996. State-space Formulation for Structure Dynamics. Massachusetts Institute of Technology, Massachusetts.
Musil, M., M. Sivy, O. Chlebo and O. Prokop. 2017. Seismic Response of Elevated Liquid Storage Tanks. p978-81.
Patil, A. and P. Kumbhar. 2013. Time history analysis of multistoried RCC buildings for different seismic intensities. Int. J. Struct. Civil Eng. Res. 2(3): 194-201.
Rowell, D. 2002. State-Space Representation of LTI Systems. Available from: http://web.mit.edu/2.14/www/Handouts/StateSpace.pdf. [Last accessed on 2000 Jan 01].
Saatcioglu, M. and J. Humar. 2003. Dynamic analysis of buildings for earthquake-resistant design. Can. J. Civil Eng. 30(2): 338-359.
Simeonov, V. K., M. V. Sivaselvan and A. M. Reinhorn. 2000. Nonlinear analysis of structural frame systems by the state-space approach. Comput. Aided Civil Infrastruct. Eng. 15(2): 76-89.
Simulate Time Response of Dynamic System to Arbitrary Inputs- MATLAB Lsim. n.d. Available from: https://www.mathworks.com/help/control/ref/lsim.html. [Last accessed on 2020 Jan 01].
Waghmare, P. B., P. Pajgade and N. Kanhe. 2012. Response spectrum analysis of a shear frame structure by using MATLAB. Int. J. Appl. Sci. Eng. Res. 1(1): 1-10.
Wang, C. Y. 1998. Dynamic Simulation Tool for Seismic Analysis. Massachusetts Institute of Technology, Massachusetts.
Wilkinson, S. and R. Hiley. 2006. A non-linear response history model for the seismic analysis of high rise framed buildings. Comput. Struct. 84(5-6): 318-329.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2020 Barham H. Ali, Brwa A. Saeed, Twana A. Hussein
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Authors who publish with this journal agree to the following terms:
1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License [CC BY-NC-ND 4.0] that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).