Degradation Mechanisms and Residual Mechanical Properties of Reinforcing Steel Bars Exposed to Natural and Artificial Corrosion – Review & Analysis
DOI:
https://doi.org/10.25156/ptj.v12n2y2022.pp70-84Keywords:
Reinforcing bar, Mechanical properties, accelerated corrosion, uniform corrosion, pitting corrosionAbstract
Reinforcement corrosion is the most problematic phenomenon and one of the main sources for the degradation of structures and infrastructures all across the world, that leads to their premature deterioration before design life has been attained. Therefore, the structural effects of rebar corrosion are crucial in determining the structural performance and residual strength of impaired structures. In the present work, the corrosion initiation mechanisms, corrosion products, corrosion types, corrosion consequences on structural performance and detrimental factors related to corrosion were presented in brief. Moreover, the propagation period and the main consequences on mechanical properties of steel and concrete are analyzed. Analyses of the available statistical data collected from literature were performed for 443 specimens. The findings are further interpreted from structural point of view, and deterioration equations for the mechanical properties of the corroded reinforcements are developed. The relations are well analyzed, leading to the definition of decay equation for yielding and ultimate stresses, and ultimate strain. It was found that the mass loss of 1% due to the rebar corrosion can cause the strength loss of 1.34%, 1.30%, and 3.54% respectively for yield strength, ultimate strength, and elongation. The suggested formulas can be applied in analytical and numerical structural applications.
Downloads
References
Abdelatif A.O., Ozbolt J., Gambarelli S., 3D finite element modelling of corrosion of lap splice joints in concrete, Construction and Building Materials 169 (2018) 124–131.
Ahmad S., Reinforcement corrosion in concrete structures, its monitoring and service life prediction––a review, Cement & Concrete Composites 25 (2003) 459–471.
Ahmed G.H., Askandar N.H., Jumaa G.B., A review of largescale 3DCP: Material characteristics, mix design, printing process, and reinforcement strategies, Structures 43 (2022) 508–532.
Ahmed G.H., Influence of time dependent corrosion on strength and ductility of reinforcing steel bars exposed to natura and aggressive environments, Polytechnic Journal. 2022. 12(1).
Ahmed G.H., Mechanical properties of welded deformed reinforcing steel bars, ARO, The Scientific Journal of Koya University, V(3), No.1(2015), 28–39, http://dx. doi.org/10.14500/aro.10059 .
Almusallam A.A., Effect of degree of corrosion on the properties of reinforcing steel bars, Construction and Building Materials 15 (2001) 361-368.
Apostolopoulos C.A., Demis S., Papadakis V.G., Chloride-induced corrosion of steel reinforcement – Mechanica performance and pit depth analysis, Construction and Building Materials 38 (2013) 139–146.
Apostolopoulos C.A., Papadakis V.G., Consequences of steel corrosion on the ductility properties of reinforcement bar, Construction and Building Materials 22 (2008) 2316–2324.
Balestra C.E.T., Lima M.G., Silva A.R., Junior R.A.M., Corrosion degree effect on nominal and effective strengths of naturall corroded reinforcement, J. Mater. Civ. Eng. (2016), 04016103.
Balestra C.E.T., Nakano A.Y., Savaris G., Junior R.A.M., Reinforcement corrosion risk of marine concrete structures evaluated through electrical resistivity: Proposal of parameters based on field structures, Ocean Engineering 187 (2019) 106167.
Bautista A., Pomares J.C., Gonzalez M.N., Velasco F., Influence of the microstructure of TMT reinforcing bars on their corrosion behavior in concrete with chlorides, Construction and Building Materials 229 (2019) 116899.
Bazan A.M., Galvez J.C., Reyes E., Lamuela D.G., Study of the rust penetration and circumferential stresses in reinforced concrete at early stages of an accelerated corrosion test by means of combined SEM, EDS and strain gauges, Construction and Building Materials 184 (2018) 655–667.
Brito JD, Kurda R., The past and future of sustainable concrete: A critical review and new strategies on cement-base materials, Journal of Cleaner Production, 2021, 281(8):123558.
Cairns J., Plizzari G.A., Du Y., Law D.W., Franzoni C., Mechanical properties of corrosion-damaged reinforcement, ACI materials journal, Title no. 102-M29, 102(4) Jul/Aug (2005), 256 – 264.
Chen D., Mahadevan S., Chloride-induced reinforcement corrosion and concrete cracking simulation, Cement & Conc. Composites 30 (2008) 227–238.
Chen F.X., Zhong Y.C., Gao X.Y., Jin Z.Q, Wang E.D., Zhu F.P., Shao X.X., He X.Y., Non‑uniform model of relationship betwee surface strain and rust expansion force of reinforced concrete, Scientific Reports, (2021) 11:8741, nature portfolio, https://doi.org/10.1038/s41598 -021-88146-2.
Cui Z., Lifetime performance prediction of reinforced concrete structures in multi-threat areas, Graduate Theses and Dissertations, 15285, PhD dissertation, Iowa State University, 2016, 188 pages, https://lib.dr.iastate. edu/etd/15285.
Diaz B., Guitian B., Novoa X.R., Perez M.C., The effect of chlorides on the corrosion behavior of weathered reinforcing bars Electrochimica Acta 336 (2020) 135737.
Eid J., Takenouti H., Saadi B.A., Taibi S., Electrochemical studies of steel rebar corrosion in clay: Application to a raw earth concrete, Corrosion Science (2020), V.168, 15 May 2020, 108556, https://doi.org/10.1016/ j.corsci.2020.108556 .
Fernandez I., Bairan J.M., Mari A.R., Corrosion effects on the mechanical properties of reinforcing steel bars. Fatigue and σ–ɛ behavior, Construction and Building Materials 101 (2015) 772–783.
Fernandez I., Berrocal C.G., Mechanical Properties of 30 Year‑Old Naturally Corroded Steel Reinforcing Bars, International Journal of Concrete Structures and Materials, (2019) 13:9, https://doi.org/10.1186/s40069-018-0308-x .
Finozzi I., Saetta A., Budelmann H., Structural response of reinforcing bars affected by pitting corrosion: experimental evaluation, Construction and Building Materials 192 (2018) 478–488.
Firodiya P.K., Sengupta A.K., Pillai R.G., Evaluation of Corrosion Rates of Reinforcing Bars for Probabilistic Assessment of Existing Road Bridge Girders, J. Perform. Constr. Facil. (2015), 04014067, https:// doi.org/10.1061/(ASCE)CF.1943-5509.0000579 .
Francois R., Khan I., Dang V.H., Impact of corrosion on mechanical properties of steel embedded in 27-year-old corroded reinforced concrete beams, Materials and Structures (2013) 46:899–910.
Gao Y., Zheng Y., Zhang J., Xu S., Zhou X., Zhang Y., Time-dependent corrosion process and non-uniform corrosion of reinforcement in RC flexural members in a tidal environment, Construction and Building Materials 213 (2019) 79–90.
Garcia D., Laurens S., Panin S., A comprehensive study of the spatial distribution of the galvanic protection current supplied by zinc layer anodes applied to steel-reinforced concrete structures, Corrosion Science 158 (2019) 108108.
Garcia E., Torres J., Rebolledo N., Arrabal R., Sanchez J., Corrosion of steel rebars in anoxic environments. Part I: Electrochemical measurements, MDPI, Materials 2021, 14, 2491. https://doi.org/10.3390/ma14102491 .
Ghafur H. Ahmed, Omar Q. Aziz, Shear behavior of dry and epoxied joints in precast concrete segmental box girder bridges under direct shear loading, Engineering Structures 182 (2019) 89–100.
Hu J., Deng P., Li X., Zhang J., Wang G., the vertical Non-uniform corrosion of Reinforced concrete exposed to the marine environments, Construction and Building Materials 183 (2018) 180–188.
Hu M., Han Q., Xu K., Du X., Corrosion influences on monotonic properties of ultra-high-strength reinforcing steels Construction and Building Materials 198 (2019) 82–97.
Huang C.H., Effects of rust and scale of reinforcing bars on the bond performance of reinforcement concrete, J. Mater. Civ. Eng., 2014, 26(4): 576-581.
Imperatore S., Rinaldi Z., Drago C., Degradation relationships for the mechanical properties of corroded steel rebars Construction and Building Materials 148 (2017) 219–230.
Jiang B., Doi K., Tsuchiya K., Kawano Y., Kori A., Ikushima K., Micromechanical properties of steel corrosion products in concrete studied by Nano-indentation technique, Corrosion Science (2019), V.163, Feb. 2020, 108304, https://doi.org/10.1016/j. corsci.2019.108304 .
Jones S., Martys N., Lu Y., Bentz D., Simulation studies of methods to delay corrosion and increase service life for cracked concrete exposed to chlorides, Cement & Concrete Composites 58 (2015) 59–69.
Koulouris K., Apostolopoulos C., Study of the residual bond strength between corroded steel bars and concrete—A Comparison with the recommendations of Fib Model Code 2010, MDPI, Metals 2021, 11, 757, https://doi.org/10.3390/met11050757 .
Lin H., Zhao Y., Feng P., Ye H., Ozbolt J., Jiang C., Yang J.Q., State-of-the-art review on the bond properties of corroded reinforcing steel bar, Construction and Building Materials 213 (2019) 216–233.
Lin H., Zhao Y., Ozbolt J., Wolf R. H., Bond strength evaluation of corroded steel bars via the surface crack width induced b reinforcement corrosion, Engineering Structures 152 (2017) 506–522.
Lu C., Yuan S., Cheng P., Liu R., Mechanical properties of corroded steel bars in pre-cracked concrete suffering from chloride attack, Construction and Building Materials 123 (2016) 649–660.
Ma Q., Nanukuttan S.V., Basheer P.A.M., Bai Y., Yang C., Chloride transport and the resulting corrosion of steel bars in alkali activated slag concretes, Materials and Structures, 2015, https://doi.org/10.1617/S11527-015-0747-7 .
Michel A., Otieno M., Stang H., Geiker M.R., Propagation of steel corrosion in concrete: Experimental and numerica investigations, Cement and Concrete Composites 70 (2016) 171-182.
Ou Y.C., Susanto Y.T.T., Roh H., Tensile behavior of naturally and artificially corroded steel bars, Const. and Building Materials 103 (2016) 93–104.
Shekhar S., Ghosh J., Padgett J.E., Seismic life-cycle cost analysis of ageing highway bridges under chloride exposure conditions: modelling and recommendations, Structure and Infrastructure Engineering, 14:7 (2018), 941-966, https://doi.org/10.1080/15732479.2018. 1437639.
Sola E., Ozbolta J., Balabanic G., Mir Z.M., Experimental and numerical study of accelerated corrosion of steel reinforcement in concrete: Transport of corrosion products, Cem Conc Research 120 (2019) 119–131.
Soleimani M., Mirzadeh H., Dehghanian C., Effects of tempering on the mechanical and corrosion properties of dual phase steel, Materials today communications, V.22, March 2020, 100745, https://doi.org/10.1016/j. mtcomm.2019.100745 Sun X., Kong H., Wang H., Zhang Z., Evaluation of corrosion characteristics and corrosion effects on the mechanical properties of reinforcing steel bars based on three-dimensional scanning, Corrosion Science (2018), V.142, Sep. 2018, 284 – 294, https://doi.org/10.1016 /j.corsci.2018.07.030 .
Tang F., Corrosion of steel fibre reinforced concrete (SFRC) subjected to simulated stray direct (DC) interference, Mat. Today Com. 20 (2019) 100564.
Tang F., Lin Z., Chen G., Yi W., Three-dimensional corrosion pit measurement and statistical mechanical degradation analysis of deformed steel bars subjected to accelerated corrosion, Con. and Building Materials 70 (2014) 104–117.
Uthaman S., George R.P., Vishwakarma V., Harilal M., Philip J., Enhanced seawater corrosion resistance of reinforcement in nanophase modified fly ash concrete, Construction and Building Materials 221 (2019) 232–243.
Uygunogu T., Gunes I., Biogenic corrosion on ribbed reinforcing steel bars with different bending angles in sewage systems, Construction and Building Materials 96 (2015) 530–540.
Wang X., Nguyen M., Stewart M.G., Syme M., Leitch A., Analysis of climate change impacts on the deterioration of concrete infrastructure–Part 1: Mechanisms, practices, modelling and simulations–A review, published by CSIRO, Canberra, (2010), ISBN 9780 4310365 8.
Xia J., Jin W.L., Li L.Y., Performance of corroded reinforced concrete columns under the action of eccentric loads, Journal of Materials in Civil Engineering, Vol 28, No 1, Jan. 2016, https://doi.org/ 10.1061/(ASCE)MT.1943-5533.0001352
Xu Y., Jin R., Measurement of reinforcement corrosion in concrete adopting ultrasonic tests and artificial neural network, Construction and Building Materials 177 (2018) 125–133.
Yuan Y., Ji Y., Jiang J., Effect of corrosion layer of steel bar in concrete on time-variant corrosion rate, Materials and Structures (2009) 42:1443–1450, https://doi.org/10. 1617/s11527-008-9464-9 .
Zhang W., Francois R., Yu L., Influence of load-induced cracks coupled or not with top-casting-induced defects on th corrosion of the longitudinal tensile reinforcement of naturally corroded beams exposed to chloride environment under sustained loading, Cement and Conc. R. 129 (2020) 105972.
Zhang W., Zhou B., Gu X., Dai H., Probability Distribution Model for Cross-Sectional Area of Corroded Reinforcing Steel Bars, J. Mater. Civ. Eng., 2014, 26(5): 822-832.
Zhang X., Li B., Shear-strength capacity assessment of corroded reinforced concrete beam-column joints, J. Perform. Constr. Facil., 2018, 32(5): 04018067.
Zhu W., Francois R., Poon C.S., Dai J.G., Influences of corrosion degree and corrosion morphology on the ductility of steel reinforcement, Construction and Building Materials 148 (2017) 297–306.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Ghafur H. Ahmed, Ghazi B. Jumaa, Nasih H. Askandar
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Authors who publish with this journal agree to the following terms:
1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License [CC BY-NC-ND 4.0] that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
Polytechnic Journal ; A Periodical Open Access Scientific Journal